SDS

Page 4 of 5
SECTION 5 - PHYSICAL DATA
VAPOR PRESSURE: Less than 0.01 mm Hg @ 20°C
PH: Essentially Neutral
SPECIFIC GRAVITY: 0.868
LB/GAL: 7.23
WATER SOLUBILITY: Insoluble
PERCENT VOLATILE: Negligible from open container in 4 hours @ 38°C (100°F)
VAPOR DENSITY: Greater than 1 (Air = 1)
EVAPORATION RATE: Less than 0.01 (@1 ATM and 25°C. n-butyl acetate = 1)
ODOR: Mild Petroleum oil like
APPEARANCE: Amber Viscous Liquid
VISCOSITY: 10.0 – 11.0 cSt @ 100°C
SECTION 6 - STABILITY
STABILITY: Stable
INCOMPATIBILITY: Strong reducing agents. Strong oxidizing agents.
POLYMERIZATION: Will not occur.
THERMAL DECOMPOSITION: Smoke, carbon monoxide, alsdehydes and other products of
incomplete combustion. Hydrogen sulfide, alkyl mercaptans,
and sulfides may also be released. Under combustion
conditions, oxides of the following elements will be formed:
calcium, sulfur, nitrogen, and zinc.
SECTION 7 - SPILL OR LEAK PROCEDURES
SPILL PROCEDURES: Prevent entry into sewers and waterways. Pick up free liquid for recycle or
disposal. Absorb small amounts with an inert material. Personal Protective
Equipment must be worn.
WASTE DISPOSAL: Dispose according to current local, state and federal regulations. Materials may
become hazardous waste through use. If permitted, incineration may be
practical. Consider recycling.
SECTION 8 - SPECIAL PRECAUTIONS
SPECIAL PRECAUTIONS: Keep away from chlorine, fluorine, or other strong oxidizers. Keep
containers closed when not in use. Do not handle or store near high
heat or flames. Avoid breathing oil mists, wash skin thoroughly with
soap and water after handling. Avoid prolonged or repeated contact.