User's Manual

电 话 Tel：[phone]
16
Chapter 6 WEB Configuration
6.1 Introduction of WEB Interface
 The data of the pictures on the WEB interface in this document are for reference
only.
 When you log in the WEB with different identities, the parameters of the
operation interface will be different. This document describes how to log in the
operation interface as an administrator.
 Parameter names, ranges and default values are subject to change or adjustment
and the display values shall prevail.
 When the system sends reset, shutdown or upgrade instruction to the inverter,
the inverter may not be connected to the power grid, which may affect electricity
generation.
 The power adjustment parameter of the power grid for the inverter shall be set
by professionals. Incorrect setting of power adjustment parameter may cause that the
inverter is not connected to the power grid according to the requirements of the power
grid, which affects electricity generation.
6.2 Operating Environment
 Support Windows 7 or higher version operating system.
 Browser: It is recommended to use Chrome52, Firefox58, Internet explorer 11
or higher versions.
6.3 IP Configuration
 Connect one end of the network cable to LAN1 or LAN2 port of LAN1 and the
other end to the computer.