SDS
Floating Porcelain Tile System
MATERIAL SAFETY DATA SHEET
POLYSTYRENE PLASTIC TRAY
PAGE 2
Flammability of the Product: May be combustible at high temperature
Auto-ignitionTemperature: 440
o
C (824
o
F) Flashpoint: >392
o
F (200
o
C)
Flammable Limits: Not available Products of Combustion: Carbon oxides (CO, CO2), soot
Fire Hazards in Presence of Various Substances: No specic information is available
Explosion Hazards in Presence of Various Substances: Risks of explosion of the product in presence of mechanical
impact: Not expected. Risks of explosion of the product in pres
ence of static discharge: Possible. No specic information is avail-
able in our database.
Fire Fighting Media and Instructions: SMALL FIRE: Use DRY chemical extinguisher (ABC or BC)
C
O
2, or water spray.
LARGE FIRE: Use water spray, fog or foam.
DO NOT use water jet.
Protective Clothing (Fire): Wear MSHA/NIOSH approved self-contained breathing
apparatus or equivalent and full protective gear.
Special Remarks on Fire Hazards: Fire may produce irritating gases and dense smoke.
Small Spill and Leak: Pellets on the oor could present serious slipping problem. Good housekeeping
must be maintained at all times to avoid this hazard. Sweep, shovel or vacuum material
into clean containers.
Large Spill and Leak: Use a shovel to put the material into a convenient waste disposal container. Do not allow
any potentially contaminated water with pellets to enter any waterway, sewer or drain.
Handling: Handling of plastic may form nuisance dust. Protect personnel.
Storage: Keep container dry. Keep in a cool place. Ground all equipment containing material.
Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible
materials should be stored away from extreme heat and away from strong oxidizing
agents.
Engineering Controls: Use process enclosures, local exhaust ventilation or other engineering controls to keep
airborne levels below recommended exposure limits. lf user operations generate dust,
fume or mist, use ventilation to keep exposure to airborne contaminants below
the exposure limit.
Personal Protection: Eyes: Safety glasses
Body: Coveralls
Respiratory: Ventilation is normally required when handling this product at higher
temperatures. Wear appropriate respirator when ventilation is inadequate.
Hands: Thermally insulated gloves required when handling hot material
Feet: Safety slip proof shoes in areas where spills or leaks can occur.
SnapSys Polystyrene Plastic Tray Material Safety Data Sheet, Version 1.4, 11/2013