Use and Care Manual

BOLTING DOWN YOUR SAFE
We recommend bolting your safe to the floor using two ¼” wedge anchor
concrete bolts through the predrilled holes in the BOTTOM of the safe.
CARE AND MAINTENANCE
With a little care and maintenance your SnapSafe
®
Titan Safe will last a lifetime.
Keep the door hinge pins lightly greased so that the door opens smoothly.
Vacuum the inside from time to time, and wipe down the outside with a
soft cloth and mild detergent. Never use harsh solvents or abrasives on any
surfaces, as they may damage the exterior finish or interior materials.
SNAPSAFE LIFETIME WARRANTY
If you ever experience a fire or attempted break-in we’ll repair or replace your
safe at no charge. All you have to do is to forward the report from the proper
investigative agency.
11/2017 17SNAP0076
Instructional videos for SnapSafe
®
products are available at snapsafe.com.
Customer Service: PO Box 1848, Grand Island, NE 68802-1848
1-877-214-4470 | Email: [e-mail] | snapsafe.com