Use and Care Manual

Thank you for purchasing a SnapSafe
®
Titan. Now you have the peace-of-mind
knowing your valuables are protected from loss due to fire or theft. Best of all,
you can easily locate or relocate this protection anywhere piece-by-piece to
any room in minutes. The SnapSafe
®
Modular Assembly System offers all the
impregnability of a welded safe in an easy-to-assemble modular design.
YOUR COMBINATION CODE
• Your factory preset combination code is 1-2-3-4-5-6.
Store this combination in a location other than your safe.
OPENING AND CLOSING YOUR SAFE
OPENING:
1. Enter the 6-digit combination code.
2. Rotate 3-spoke handle clockwise into the open position and pull door open.
3. The Entry Keypad relocks in 4 seconds after a valid code has been entered.
4. The Entry Keypad will return to“standby” status with a long beep sound if
there is no operation in 10 seconds after the system has been activated.
5. If you enter an incorrect combination 4-times in a row, the lock will shut down
for 5-minutes.
Double Door Safes ONLY: To open the second door, push handle in door
frame all the way down to unlock and swing door open.
CLOSING:
1. Close safe door.
2. Rotate 3-spoke handle counter-clock wise to the closed position until you hear
bolts engage.
Double Door Safes ONLY: To close the left door, push handle in door frame
all the way down and swing door closed. Lift handle all the way up to lock
leftdoor.
Note: Each step in the code change process must be completed in 10 seconds or
the system reverts back to “standby” status.
Double door handle up to lock left door.
Lock
Double door handle down to unlock left door.
Unlock
Customer Service: PO Box 1848, Grand Island, NE 68802-1848
1-877-214-4470 | Email: [e-mail] | snapsafe.com