Owner manual

23
TWIN STICK CONTROL ASSEMBLY
(Model ZMT2500KH)
ITEM PART NO. DESCRIPTION
1 1-0061 KEY, 3/16” Square x 1”
2 1-0739 RING, 5/8” External Retaining
3 1-1791 RETAINER, 5/16” Bolt (2)
4 1-3072 ROLL PIN, 1/4” x 1” (5)
5 1-3874 BUSHING, 5/8 I. D. x 5/8” (5)
6 2-3556 BUSHING, Caster
7 3-5532 BRACKET, Joystick Mounting
8 3-5533 BLOCK, Pivot
9 4-2638 WELDMENT, Arm/Hub (4)
10 7-3060 PLATE, Bushing, Hydro Shaft (2)
11 5-8108 WELDMENT, R. H. Control Bellcrank
12 5-8109 WELDMENT, L. H. Control Bellcrank
13 5-8110 WELDMENT, R. H. Control
14 5-8111 WELDMENT, L. H. Control
15 5-8115 ASSEMBLY, Ball Joint Link 5.12” (2)
Includes 7-1970 (Rod), 1-5753 Ball Joint (2) & 9-1605 Hex Nut (2)
16 5-8116 ASSEMBLY, Ball Joint Link 20.4”
Includes 7-1971 (Rod), 1-5753 Ball Joint (2) & 9-1605 Hex Nut (2)
17 5-8117 ASSEMBLY, Ball Joint Link 20.56”
Includes 7-1971 (Rod), 1-5753 Ball Joint (2) & 9-1605 Hex Nut (2)
18 7-1944 HYDRO SHAFT, L.H.
19 7-1945 HYDRO SHAFT, R.H.
20 7-1959 PLATE, R.H. Bearing
21 7-3061 PLATE, L.H. Bearing (Twin-Stick Z Mower)
22 7-1964 ARM, R.H. Twin Stick Control
23 7-2022 ARM, L.H. Twin Stick Control
24 7-2047 BRACKET, Dampener Mounting
25 7-2212 GRIP, Twin Stick (2)
26 7-2442 BRACKET, Joystick Control
27 9-0361 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap (2)
28 9-0848 SET SCREW, 5/16-18 x 1/2” Square Head Cup Point (2)
29 9-1016 SCREW, 1/4-20 x 5/8” Hex Head Self-Tap (4)
30 9-1067 NUT, 5/16-18 Hex Center Lock, Grade 8 (4)
31 9-1099 NUT, 1/4-20 Hex Center Lock, Grade 5 or B (4)
32 9-1190 BOLT, 5/16-18 x 1-1/2” Curved Head Square Neck (4)
33 9-1296 WASHER, .34 I.D. Flat (20)
34 9-1298 NUT, 5/16-18 Hex Nyloc (7)
35 9-1303 BOLT, 5/16-18 x 1” Round Head Short Neck Carriage, Grade 5 (3)
36 9-1508 BOLT, 5/16-18 x 3/4” Round Hd. Short Neck Carriage, Grade 5 (3)
37 9-1628 WASHER, 5/8” I. D. Flat
38 9-1800 BOLT, 5/16-18 Shoulder (4)
39 9-1809 COTTER PIN, 1/8 x 1-1/4” (2)
40 9-1812 NUT, 1/4-28 Hex Nyloc (9)
41 9-1816 ROLL PIN, 1/4 x 2-3/4”
42 7-2934 BUSHING, .632 I. D. x .753 O.D. Teflon Impregnated (2)
43 9-2009 CYLINDER, Dampener
44 9-2010 BOLT, 1/4-20 Socket Head Shoulder (4)
MID MOUNT Z-RIDER MANUAL No. 06110