Manual

MAINTENANCE INSTRUCTIONS
To adjusttension, remove extension rod mountingbolt
and nut. See Figure62.
Move extension rodto next hole towards rearof deck and
securewith mountingbolt and nut. MOUNTING-
NUT & BOLT
Measure extension spring with blade engagement lever in
the "ON" and "OFF" positions. See Figure 61. Continue
adjustment until tension is correct.
I
-_LEAST TENSION/d
• _L / MOSTTENSlON
"-_ //
FIGURE 62
NOTE:
Beforeadjusting deck, bring tire pressureto properpsi.
Front12 psi, Rear 10 psi.
SIDE TOSIDE LEVEL
Movetractorto a firm, level surface.
Turn engine"OFF".
Raisehood,removesparkplugwirefrom sparkplug and
securewire away from plug.
Move blade engagementleverto "OFF".
Place a piece of angleironundercenterrearof deck.
SECTOR
PLATE
__ REMOV_ _
Remove hair pins and washers securing rear of deck to
sector plates. See Figure 65.
FIGURE 65
31