Manual

MAINTENANCE INSTRUCTIONS

NOTE:

Thedeckshouldbe set sothatthe rearofthedeck is1/4"

lowerthan the front.See Figure69.

FRONT

X • 1/4"

33" DECK SHOWN

P'/////;! REAR

FRONT TO REAR LEVEL- FRONT LIFT ROD

If the sector plates are in their lowest setting and proper L__ MEASUREFROM

level cannot be obtained, adjust the front liftrod asfollows: BLADETIPSTOFLOOR

FIGURE 69

Movedeck lift leverto #5 position.

30" & 33" DECK

Placea 2X4 woodenblockon edge underfrontcenterof

deck.

Placea 3X3 wooden blockunder rearcenterof deck.

NUT

Remove hair pinsand washers securingsectorplates.

Lowerrear ofdeck onto3X3 block.See Figure68.

Removehairpinandwasher securingfrontliftrodtofront

liftarm. See Figure 70.

Removefrontliftrod andcarefullyrestfrontof deckonto

2X4 block.

Loosenjam nuton front liftrod.See Figure70.

•HAIR PIN

_ FRONT UFT ROD

FIGURE 70

Turnfrontliftrodhangerblockuntilitcan bereinstalledinto

frontliftarm withoutliftingdeck. See Figure70.

Secure lift rodto liftarm withwasher and hair pin.

Placesectorplatesonto rearhangerbracketsandsecure

withwashers and hairpins.

Raisedeck and removewooden blocks.

Repeat steps for frontto rear level adjustment.Referto

FRONT TO REAR LEVEL- SECTOR PLATESo

Make certainsectorplates are mountedin the same I

holes on each sideforproperfront to rear level. I