Manual

MAINTENANCE INSTRUCTIONS
Slidesectoroffof pinsandcarefullylowerdeckontoangle
iron.
33" DECK SHOWN
Rotate.blade(s) untilblade tipsare at each sideof deck.
•Measuredistancefrom bladetiptoflooron each sideof LMEASUREFROM
deck. BLADE TIPS
TO FLOOR
Bladetipsshouldbe within1/8"ofeachotherfor thedeck
to be consideredlevel.See Figure66.
Ifmeasurementdiffersmorethan 1/8",adjustasfollows:
Loosenfrontliftarmpivotboltonfrontofrightsiderail.See
Figure67.
NOTE:
The 38" deck does notincorporatea pivotbolt.
PIVOT BOLT
LOOSEN
SHOULDER BOLT
_-_ ANGLE IRON
FIGURE 66
f
Looseneccentricshoulderbolt. See Figure67.
Turneccentric"UP"or'DOWN" as requiredtoleveldeck.
See Figure67.
Tighteneccentricshoulderbolt.
Tighten pivotbolt.
J
ECCENTRIC
AS REQUIRED
FIGURE 67
Placesectorplates back ontorear lift arms and secure
withwashersand hairpins. SECTORPLATES
Make certainsectorplatesare mountedin thesame _---_,,, ,,__ _;¢__ ________
holeson eachside forproperfrontto rearlevel.
FRONT TO REAR LEVEL-SECTOR PLATES --_-- "_-_
LOWEST OE
Removehairpinsand washerssecuringsectorplatesto
rearliftarms.See Figure68. _ ~ _DECI(-S'_ING _ -------_-SETTING
Movesectorplate as requiredto raiseorlowerdeck. ___.-__ .)_1--'_ I_11_1_
DECK
REMOVE'
HAIR PIN & WASHER
FIGURE 68
32