Manual

Problem Correction
The grassdoesnotdischarge
correctly.
The mowerhousingdoes not
cutlevel.
The mowerblades will not
rotate.
The unitwill notmovewhen
the brake is releasedand the
speedcontrolpedal is
depressed.
The unitmovesslower or
stopswhen thespeed control
pedal isdepressed.
Troubleshooting Chart Continued
1. Stop the engine. Clean the mower deck.
2. Raisethe height of cut.
3. Replaceor sharpen the blade(s).
4 Use a slower ground speed.
5. Move the throttle control to the FASTposition.
6. Replacethe spring for the bladeidler.
1. Checkthe air pressure in the tires.
2. Adjust the level of the mower deck.
3. Checkthe front axle. If the front axle does not freely pivot, loosen the axle bolt(s).
1. Checkthe mower drive belt(s). Makesure the belt(s) are installed correctly.
2. Replacethe mower drive belt(s).
1. Releasethe automatic drive disconnect.
2. Checkthe motion drive belt. Make sure the belt is installed correctly.
3. Replacethe motion drive belt.
1. Checkthe motion drive belt. Make sure the belt is installed correctly.
2. Replacethe motion drive belt.
Whenthe brake pedal is 1. Temporary belt noise does not change the operation of the unit. If belt noise is
released, belt noise can be continuous, check the routing of the belt. Make sure the belt is inside all belt guides.
heard.
The rear wheels spinover 1. Checkthe front axle. If the front axle does not freely pivot, loosenthe axle bolt(s).
uneventerrain.
o
o
o
English
41