Manual

Figure 7. Steeringpost

A - Screw

B - Washer

C - Cover

D- Decal (Optional)

E- Steering wheel

F- Bellows

G - Steering post

H- Straight

MaintenanceFreeBattery

IMPORTANT:Beforeyou attach the battery cables to the

battery, checkthe battery date.The battery date tells if the

battery must be charged.

1. Checkthe top and the side of the battery for the

location of the battery date (Figure 9).

2. If the batteryis put into service before the batterydate,

the battery cables can be attachedwithout charging the

battery.See"How To Install The BatteryCables".

3. If the batteryis put into service afterthe batterydate,

the batterymust be charged. See"How To Charge The

Maintenance FreeBattery".

Howto ChargetheMaintenance Free Battery

,_ WARNING:Whenyou chargethe battery, do not

smoke. Keepthebatteryaway from any sparks.The

fumesfrom the batteryacid can causean

explosion.

1. Remove the batteryand batterytray.

2. Remove the protective cap from the batteryterminal.

3. Use a 12 volt battery charger to charge the battery.

Chargeat a rate of 6 amperesfor one hour. If you do

not havea battery charger, have an authorized service

center charge the battery.

4. Install the batteryand batterytray. Make sure the

positive (+) terminal is on the left side.

Howto Install the BatteryCables

WARNING:To preventsparks,fasten thered cable

to the positive(+) terminal before you connectthe

blackcable.

Usethe fasteners shown below to install the batterycables.

The fasteners are shown at full size.

Figure 8: Battery cable parts

A - Carriagebolt (Also see 'A' in Figure 3)

B- Wing nut (Also see 'B' in Figure 3)

English