Manual

ManualsBrandsSnapper ManualsRiding Mowers & Tractors(7800344) Official Snapper lawn tractor

e--

€_

a,.,

Howto Use the CruiseControl

To engagethe cruise control:

1. Slowly push the speedcontrolpedal forward to the

desired speed (Figure 12).

2. Pull up on the cruisecontrolknob (Figure 13). Release

the speedcontrolpedal. The unit should continue

traveling forward at the desired speed.

NOTE:The cruise control only operatesin forward

speeds.

To disengagethe cruise control:

1. Push the speedcontrolpedal (Figure 12), OR

2. Push the brakepedal.

,_ WARNING:Do notengagethe cruisecontrolwhen

drivingon slopes,or whenpeopleor animals are in

thevicinity.

Figure 13: Cruisecontrol

A - Cruise Control knob

Howto Drive in Reverse

1. Look to the rear.

2. Slowly push the speedcontrolpedal to the REVERSE

position.

Howto ChangeDirection

CAUTION:To changedirections,do not usethe left brake

pedal. Useonly thespeed controlpedal.

1. Slowly removeyour foot from the speed controlpedal.

The speedcontrolpedal will automatically return to the

NEUTRALposition.

2. When the unit stops, slowly move the speed control

pedal to the desired direction.

SpeedControlPedal Positions

The forward speed is controlled by the position of the speed

controlpedal. The following chart provides functions along

with the pedal positions.Always operatethe engine with the

throttlecontrolin the FASTposition.

Function

Trimming

Snow Thrower

Bagging Grass

Normal Mowing

EasyMowing

Snow Blade

Transport

Pull Behind

Attachments

Pedal Positon

1/3

1/3 to 1/2

1/2 to 2/3

1/2 to 3/4

FULL

1/3 to 1/2

ThrottlePosition

FastThrottle

Howto DisconnecttheTransmission

To push the unit, use the automatic drivedisconnectto

releasethe transmission. The automaticdrive disconnectis

locatedon the right rear of the unit.

1. The engine must be off.

2. Pull out and lockthe automaticdrive disconnectinthe

PUSHposition (Figure 13). The transmission is now

released andthe unit can be pushed.

NOTE:In cold weather, the heavyviscosity oil in the

transmission will makethe unit difficult to push.

3. To engagethe transmission, unlock and push in the

automaticdrivedisconnect.The transmission is now

connected and ready to operate.

English