MSDS

Section 6: Accidental release measures
6.1 Personal precautions, protective equipment, and emergency procedures: wear protective
gloves and glasses, remove spilled material and do not inhale the gas as much as possible . do
not touch as much as possible .
6.2 environmental precaution: Do not throw out into the environment especially water source and
sewer.
6.3 Methods and materials for containment and cleaning up: The spilled solid are put into the
container, the leaked place is wiped off with dry cloth .
Section 7: Handling and Storage
7.1 Precautions for safe handling：
处置
Handling
Do not wet the battery with water, seawater, drink or acid;
or expose to strong oxidizer.
・Do not damage or remove the external tube.
・Keep the battery away from heat and fire.
・Do not disassemble or reconstruct the battery; or solder
the battery directly.
・Do not give a mechanical shock or deform.
・Do not use unauthorized charger or other charging method.
Terminate charging when the charging process doesn’t end
within specified time.
7.2 Conditions for safe storage, including any incompatibilities：
储存
Storage
Do not store the battery with water, seawater, strong acid or
strong oxidizer.Avoid direct sunlight, high temperature, and
high humidity.
Section 8: Exposure Control / Personal Protection
8.1 Control parameters:
Occupational exposure limits: no exposure limit
Biological limit values: no exposure limit
exposure weather limit : forbidden to exposure in water .
8.2 Appropriate engineering controls: Leak from a damaged or opened battery: Provide
adequate ventilation if fumes or vapours are generated
8.3 Individual protection measures, such as personal protective equipment
Hand protection： not necessary under normal condition
Eye protection : not necessary under normal condition
Body protection: not necessary under normal condition
Summarize； personal protective equipment should be used when the battery is