Install Drawing

3
Figure 5
A
B
Figure 7
C
A
Figure 6
B
A
C
D
2. Fuel Line
A. Install the fuel line (A, Figure 8) fully onto the fuel barb
on the bottom of the fuel tank (B). Secure with the hose
clamp (C). NOTE: The hose clamp should be placed
approximately 1/8” from the end of the hose.
OPERATOR’S SEAT
1. Seat Bracket Installation
A. Insert the 5/16” carriage bolts (B, Figure 9) into the seat
brackets (A). Secure the carriage bolts with the bolt
retainers (C).
B. Secure the seat brackets onto the bottom of the seat (A,
Figure 10) with the self-tapping flange screws (B). Tighten
securely. NOTE: Make sure the seat brackets are installed
with the carriage bolts facing outward.
C
A
B
A
A
B
C
B
Figure 8
Figure 9
Figure 10
B
Not for
Reproduction