Manual

Operation(Continued)
Stopping- Engine, Wheel
Blade(Continued)
Park Brake
Drive,
Cutting Height Adjustment
1. Adjust the cutting height by raising or lowering the deck
lift lever (A, Figure 18) into the desired height of cut
notch (B).
.
To set the park brake, pressthe clutch/brake pedal (A,
Figure 16) all the way down, slide the park brake latch
(B) all the way in to the engaged position, and release
the clutch/brake pedal. A detent in the park brake latch
will keep the park brake engaged.
_i_ WARNING
DONOTpark the machine on slopes.
A
Figure 16.Setting the park brake
I
/
Figure 18. Cutting height adjustment
.
Releasethe park brake by pressmg down firmly on the
clutch/brake pedal (A, Figure 17). Thepark brake latch
(B) is spring-loaded, and will slide back to the disen-
gaged position unassisted.
¢D
m.
Figure 17.Releasingthe park brake
11