Manual

AFTEREACHUSE
Water should not remain in the unit for long periods of time.
Sediments or minerals can deposit on pump parts and
"freeze" pump action. Followthese proceduresafter every
use:
1. Flushdetergent system by turning its detergent shut-off
valve to "Off" position and run pressure washer with
PrecisionSprayTM Selector in a low pressure position.
Flushfor one to two minutes.
2. Shut off engine, turn off water supply, point gun in a
safe direction, press red button and squeezetrigger to
relieve trapped pressure and let engine cool.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leadingto serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• Keephighpressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
• ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyou stopengine.
3. Disconnect hose from spray gun and high pressure
outlet on pump. Drain water from hose, gun, and spray
tip extension. Usea rag to wipe off the hose.
4. Empty pump of all pumped liquids by pulling recoil
handle about 6 times. This should remove most liquid in
pump.
5. Coil high pressure hose on hook provided on handle.
6. Store unit in a clean,dry area.
7. If storing for more than 30 days see Long TermStorage
on next page.
_i, WARNING Fueland its vapors are extremely
flammable and explosive.
Fire or explosion can causesevere burns
or death.
WHENSTORINGFUELOREQUIPMENTWITHFUELINTANK
• Storeawayfrom furnaces,stoves,waterheaters,clothes
dryers,or otherappliancesthathavepilot light or other
ignitionsourcebecausetheycan ignitefuel vapors.
2O