Operator's Manual

Not for
Reproduction
12
14
Wheel Drive
1. Stop motion of the Rear Engine Rider by pushing the
clutch/brake pedal (A, Figure9) all the way down to
apply the brake.
Mower Blade
1. Stop the mower blade by releasing the blade pedals (A,
Figure15) or moving the blade lever (B) to OFF.
15
Mowing
DANGER
This machine is capable of amputating hands and feet, and
throwing objects. Failure to observe the following safety
instructions could result in serious injury or death.
• Only operate the machine in daylight hours or good
artificial light.
• Avoid holes, ruts, bumps, rocks, or other hidden
hazards.
Uneven terrain can overturn the machine or cause
operator to lose their balance or footing.
• Do not direct discharge material toward anyone. Avoid
discharging material against a wall or obstruction as
material may ricochet back toward the operator.
• Stop the blade(s) when crossing gravel surface.
• Do not leave a running machine unattended. Always
park on level ground, disengage the attachment, set
parking brake, stop engine and remove starter insert or
key.
Adjust Cutting Height
Adjust the cutting height by raising or lowering the deck lift
lever (A, Figure16) into the desired height of cut notch (B).
16
Engage the Mower Blades
1. With the engine running, move the engine speed control
to FAST.
2. Move the blade lever (A, Figure17) to ON, then press
the blade pedals (B) to hold the blade lever in the ON
position.