Operator's Manual

Not for
Reproduction
10
1. Move the transmission shift lever to (N) Neutral.
SeeWheel Drive.
WARNING
It is possible to start the engine with the transmission shift
lever in a drive position.DO NOT start the engine with the
transmission shift lever in a drive position.
2. Make sure that the Blade Lever (A, Figure8) is OFF.
8
3. Press the Clutch/Brake Pedal (A, Figure9) all the way
down and hold while starting the engine.
9
4. Move the engine speed control (A, Figure10) to CHOKE
(B) to start a cold engine.
10
5. Turn the ignition key (A, Figure11) to START until the
engine starts.
Note:If the engine does not start after 5 seconds, release the
key, make sure the Clutch/Brake Pedal is fully pressed, wait
20 seconds, and try starting again.
11