Product Manual

Not for
Reproduction
Specifications
Specifications Chart
44.18 cu in (724 cc)Displacement
9 ampAlternator, Regulated
12 V, 230 CCABattery
64 oz (1,9 L)Oil Capacity
.030 in (,76 mm)Spark Plug Gap
180 in-lbs (20Nm)Spark Plug Torque
Specifications Chart
Tuff Torq® Hydrostatic K46Transmission Type
10W-30 Premium Engine OilHydraulic Fluid
3.5 gal (13,2 L)Fuel Tank Capacity
12 - 14 PSI (0,82 - 0,96 bar)Front Tire Pressure
10 PSI (,68 bar)Rear Tire Pressure
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive Engineers)
code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque values are
derived at 2600 RPM for those engines with “rpm” called out on the label and 3060 RPM for all others; horsepower values are
derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are
taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments. Actual gross
engine power will be higher than net engine power and is affected by, among other things, ambient operating conditions and
engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine may not develop
the rated gross power when used in a given piece of power equipment. This difference is due to a variety of factors including,
but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing
and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this engine.
Parts and Accessories
Contact an authorized dealer.
19