Product Manual

Not for
Reproduction
11
3. Stop the engine and remove starter insert (A, Figure 11) or
key.
4. Clean oil fill and filter areas of any debris.
5. Remove dipstick (B) and lay on clean cloth.
6. Disconnect the oil drain hose (A, Figure 12).
12
7. Carefully remove cap (B) and lower hose into an approved
container (C).
8. After the oil has drained, install cap tightly, then attach the
hose to the side of the engine.
9. Remove the oil filter (B, Figure 13) and dispose of properly
14