n N ot fo rR ep ro du c tio 82V Lithium-Ion Cordless Mower 1696777(SXDWM82) Owner’s Manual TOLL-FREE HELPLINE: 1-800-317-7833 www.snapper.com Read all safety rules and instructions carefully before operating this tool.
CONTENTS Contents............................................................................................................................... 2 Product specifications........................................................................................................... 2 Safety information................................................................................................................. 3 Symbols............................................................................................
SAFETY INFORMATION GENERAL SAFETY RULES READ ALL INSTRUCTIONS CAREFULLY WA R N I N G D A N G E R ro du ct io n This symbol indicates important safety instructions. If these instructions are not followed, it could endanger the personal safety and/or property of the operator and others. Read and understand all instructions in this manual before attempting to operate the mower. Failure to comply with these instructions may result in personal injury.
SAFETY INFORMATION • Carefully read all instructions on the mower and in the manual before attempting to assemble and operate the mower. Keep this manual in a safe place for future reference, and consult it regularly. • Become familiar with all controls and their proper operation. Know how to stop the mower and how to disengage the power in an emergency.
SAFETY INFORMATION • Stop the motor and wait until the blade comes to a complete stop before removing the grass catcher or unclogging the chute. The cutting blade will continue to rotate for a few seconds after the motor is shut off. Do not place any part of your body in the blade area until you are sure that the blade has stopped rotating. • Never operate mower without a proper trail shield, discharge cover, grass catcher, switch control, or other safety device in place and in working order.
SAFETY INFORMATION BATTERY SAFETY RULES • Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. • Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
SAFETY INFORMATION CHARGER SAFETY RULES • Charge the mower battery in a dry area that is protected from the weather. Do not expose the mower or the charger to rain. Do not charge the battery in a wet location. Operate the battery charger in temperatures between 43° and 104°F. In order to reduce the risk of electric shock, use only the charger that is provided by the manufacturer to charge the battery. • DO NOT ABUSE THE CHARGE CORD. Never carry the charger by the cord.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
KNOW YOUR LAWN MOWER Read this operator's manual and safety rules before operating your lawn mower. Compare the illustration in Figure 1 to your lawn mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
ASSEMBLY INSTRUCTIONS PART NAME FIGURE PART NO. Lawn Mower Side Discharge Chute Handle Knob ot 1 1 4 1 Owner’s Manual N 1 4 fo Handle Bolt rR Grass Catcher Bag ep Mulching Plug ro du ct io n 1 82V Lithium-Ion Cordless Mower 1696777(SXDWM82) Owner’s Manual TOLL-FREE HELPLINE: 1-800-317-7833 www.snapper.com Read all safety rules and instructions carefully before operating this tool.
ASSEMBLY INSTRUCTIONS UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. ro du ct io WA R N I N G n • If any parts are damaged or missing, please call 1-800-317-7833 for assistance.
ASSEMBLY INSTRUCTIONS UNFOLDING AND ADJUSTING LOWER HANDLE (See Figure 2) WA R N I N G Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. • Do not damage the cables when folding or unfolding the handle. • If a cable is damaged, contact an Authorized Service Dealer. ro du ct io n • Pull and rotate the handle knobs (1) 90° on both sides to loosen the lower handles (2) on both sides. • Move the lower handles to the operating position.
ASSEMBLY INSTRUCTIONS INSTALLING THE UPPER HANDLE (See Figure 3) • Align the mounting holes on the upper handle (1) and the lower handle (2). Insert the carriage bolts (3) and use the knobs (4) to tighten them. Repeat the operation on the other side. rR ot fo (2) Lower handle ep (3) Bolt ro du ct io (4) Knob n (1) Upper handle N Fig.
ASSEMBLY INSTRUCTIONS INSTALLING THE GRASS CATCHER BAG (See Figure 4) • Lift the rear discharge door (1). • Lift the grass catcher by its handle (2) and place under the rear discharge door so that the hooks (3) on the grass catcher are seated on the door rod (4). • Release the rear discharge door. When installed correctly, the hooks on the grass catcher will extend through the openings on the rear discharge door.
ASSEMBLY INSTRUCTIONS INSTALLING/REMOVING THE MULCHING PLUG (See Figure 5) • To remove the mulching plug, lift the rear discharge door (1). • Grasp the handle (2) of the mulching plug. Lift and pull the mulching plug out using the handle. • The mulching plug (3) is inserted at an angle, so it requires some force to remove it. • The mulching plug must be removed in order to install the grass catcher bag.
ASSEMBLY INSTRUCTIONS INSTALLING SIDE DISCHARGE CHUTE (See Figure 6) • Lift the side discharge cover (1). • Align the grooves (2) on the discharge chute (3) with the pins (4) on the underside of the discharge cover (1). • Lower the discharge chute until the hooks on the mower deck are secured in the openings in the discharge chute. ro du ct io n • Release the side discharge cover. (1) Side discharge cover (2) Groove (3) Discharge chute ot fo rR ep (4) Pins N Fig.
ASSEMBLY INSTRUCTIONS TO INSTALL BATTERY PACK (See Figure 7) • Lift and hold up the battery door (1). • Align the battery (2) with the mower’s battery port. • Make sure the battery release button (3) snaps in place and that battery is fully seated and secure in the mower before beginning operation. • Close the door. ot fo rR ep (1) Battery door (2) Battery pack ro du ct io (3) Battery release button n • If the machine is not going to be used immediately, remove the battery. N Fig.
OPERATING YOUR LAWN MOWER STARTING/STOPPING THE MOWER (See Figure 8) To start the motor: • Open the battery door. • Insert the battery. • Press and hold the safety lock-out button (1). • Pull the bail lever (2) upward to the handle to start the mower and release the button. • Release the bail lever. 2 A B rR ep 1 ro du ct io n To stop the motor: Soft-Start Fig. 8 ot fo This LI-ION mower is equipped with a “soft-start” feature. When initially starting up, the mower will take approx.
OPERATING YOUR LAWN MOWER CUTTING HEIGHT ADJUSTMENT (See Figure 9) When shipped, the wheels on the mower are set to a low-cutting position. Before using the mower for the first time, raise the cutting position to the height best suited for your lawn. The average lawn should be between 1 1/2" to 2" (3.8 to 5 cm) during cool months and between 2" and 3 1/2" (5 cm to 8.3 cm) during hot months.
OPERATING YOUR LAWN MOWER SLOPE GAUGE (See Figure 10) WA R N I N G Slopes are a major factor related to accidents involving slips and falls, which can result in severe injury. Operating the mower on a slope requires extra caution. If you feel uneasy on a slope, do not mow it. For your safety, use the slope gauge that is included as part of this manual to measure slopes before operating this unit on a sloped or hilly area. ro du ct io n • Mow across the face of a slope, and never up and down.
OPERATING YOUR LAWN MOWER MOWING TIPS NOTE: A sharp blade will greatly enhance the performance of the mower, especially when cutting high grass. Be sure to check the blade and to sharpen it at least once per year, as described in the Maintenance section. • Do not mow in circles. Travel back and forth across the lawn. n • Verify that the lawn is free of stones, sticks, wires, and other objects that could damage the blades or the motor.
OPERATING YOUR LAWN MOWER EMPTYING THE GRASS CATCHER BAG (See Figure 11) • Stop mower, allow blades to completely stop, and remove the battery. • Lift the rear discharge cover. • Lift the grass catcher bag by its handle to remove from mower. • Empty grass clippings. N ot fo rR ep ro du ct io n • Lift the rear discharge cover and reinstall the grass catcher bag as described earlier in this manual. Fig.
BATTERY & CHARGER MAINTENANCE CHARGING PROCEDURE NOTE: The battery is not shipped fully charged. It is recommended to fully charge before first use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be charged at any time. Low voltage charging: ro du ct io n If the battery has been stored with little to no charge for a long period of time, the charger will go into recovery mode, which will take 20 hrs to fully charge the battery.
BATTERY & CHARGER MAINTENANCE CHARGER MOUNTING This charger can be installed hanging on a wall using two #8 screws (not included). 2. Locate the placement for the charger to be wall mounted. 3. If fastening to wood studs use 2 wood screws (not included). 4. Drill two holes 4.5 in. apart ensuring that they are vertically aligned. 5. If fastening to drywall use wall anchors (not included) and screws to secure the charger to the wall. n 1.
MAINTENANCE REPLACING THE CUTTING BLADE (See Figure 12-13) WA R N I N G Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with rags or other materials when performing any maintenance on the blades. ALWAYS remove the battery when servicing or transporting the mower. n • REMOVE BATTERY.
MAINTENANCE CLEANING THE MOWER WA R N I N G In order to reduce the risk of electric shock, do not expose the mower to water. The underside of the mower deck should be cleaned after each use, because grass clippings, leaves, dirt, and other debris will accumulate, which will cause rust and corrosion. ro du ct io n Remove any build-up of grass and leaves on or around the motor cover (do not use water). Occasionally wipe the mower clean with a dry cloth.
rR ep ro du ct io n MAINTENANCE N ot fo Locked position Unlocked position 28 Fig.
MAINTENANCE • When servicing the mower, use only identical replacement parts that are available from the manufacturer. In order to obtain replacement parts, call the toll-free helpline, at 1-800-3177833. The use of parts that do not meet the original equipment specifications may lead to improper performance, and may compromise safety. • Follow the instructions for lubricating and changing accessories. ro du ct io • Keep the handles dry, clean, and free of oil and grease.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL n The batteries used in this mower's battery pack contain the following toxic and corrosive material: LITHIUM-ION. ro du ct io WA R N I N G Toxic materials must be disposed of in a specified manner in order to prevent contamination of the environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your local waste disposal agency for information and specific instructions.
TROUBLESHOOTING POSSIBLE CAUSE The mower does not start. SOLUTION The battery is not charged. Charge the battery. The switch is defective. Replace the switch (call the tollfree helpline, at 1-800-317-7833. Grass jammed between the deck and blade. Remove battery; check under deck for jams. n PROBLEM ro du ct io The battery is not fully inserted Check the connection between the battery in the mower. and the mower. Make sure the battery clicks into place. Battery may require service or replacement.
LIMITED WARRANTY Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for and is subject to the time periods and conditions stated below. For warranty service, find the nearest Authorized Service Dealer in our dealer locator map at www.
LIMITED WARRANTY ABOUT YOUR WARRANTY Warranty service is available only through Snapper Authorized Service Dealers. This warranty covers only defects in materials or workmanship. It does not cover damage caused by improper use or abuse, improper maintenance or repair, normal wear and tear, or stale or unapproved fuel. ro du ct io n Improper Use and Abuse - The proper, intended use of this product is described in the Operator’s Manual.
EXPLODED VIEW 21 1 16 7 1718 19 20 26 11 109 15 12 13 14 111 23 27 24 30 110 32 29 113 25 31 22 114 33 112 100 95-1 99 98 123 121-1 151 115 101 147-1 125A 138 137 134 140 139 135 132 131 fo 92 38 50 ot 90 89 N 52 54 55 44 43 42 51 53 49 129 66 45 155A 58 65 157 65 66 62 84 61 63 83 60 79 48 87 57-1 128 59 63 64 62 61 157 46 124 74 73 72 38 92 156 32 94 93 154-1 123 rR 133 91 173 102 107 103 ep 136 36 109 112 152 153 122A 124 125 111 174
PARTS LIST ITEM NO. PART NO.
PART NO.
PARTS LIST PART NO. DESCRIPTION QTY 80 ----- ROD, CONNNETING 1 81 ----- NUT 2 82 770189 KIT, SPRING 1 83 770179 KIT, LEFT BRACKET 1 84 ----- HEIGHT ADJUST, LEFT 1 60 ----- BOLT 2 61 ----- BOLT 62 ----- GASKET n ITEM NO.
PARTS LIST PART NO. DESCRIPTION QTY 103 ----- ROB, DOWN PUSH 1 104 ----- BLOCK 1 105 ----- LIMIT COLUMN 1 106 ----- PIN 1 107 ----- KNOB 1 108 ----- SPRING 1 109 770175 KIT, HARDWARE 110 ----- BOLT ro du ct io n ITEM NO.
PARTS LIST ITEM NO. PART NO.
n ro du ct io ep rR fo ot N Briggs & Stratton Power Products Group, LLC P.O.
