Product Manual

Not for

Reproduction

Assembly

3. Slide hitch pivot assembly (GG) onto blade assembly

lining up holes and insert capscrew (D, Figure 9).

4. Slide washer (E) onto capscrew and secure with nut

(F).

Figure 9

5. Insert pin (a, Figure 10) into latch bar (b) and secure

with cotter pin (G). Slightly bend longer leg of cotter pin.

Figure 10

6. Attach spring extension (H, Figure 11) to notch (c) on

blade assembly and hole (d) on hitch pivot assembly.

Figure 11

7. Install nut (K, Figure 12) approximately .75” onto eye

bolt (I).

8. Insert larger, open-end of blade spring (J) into hole on

hitch pivot assembly.

9. Hook other end of blade spring onto eye bolt.

10. Insert eye bolt into hole on blade assembly. Secure

with second nut (K) and adjust the nut as needed for

blade spring back tension.

Figure 12