Product Manual

Not for
Reproduction
8
Assembly
Large Frame Tractors:
1. At the front of the tractor, align the top slot of the sub-
frame assembly to the tractor frame “J” hooks. Slide in
the latch rod (EE, Figure 5) through the slotted hole and
“J” hooks.
2. Slide the remaining latch rod (EE) through the lower
hole on the sub-frame assembly.
EE
EE
Figure 5
3. Secure both latch rods with hair pins (B, Figure 6).
B
Figure 6
Small Frame Tractors:
NOTE: Small frame tractors do not use the lower latch rod.
1. At the front of the tractor, align the top slot of the sub-
frame assembly to the tractor frame. Slide the latch
rod (HH, Figure 7) through the slotted holes of the sub-
frame assembly and the holes of the tractor frame.
HH
B
Figure 7
2. Secure latch rod with hair pin (B, Figure 7).
Front Blade Assembly
1. Insert spacer (C, Figure 8) into the hole in the blade
assembly (FF).
2. Grease (NN) the spacer and the area around the spacer
on both sides of the blade assembly.
CFF
Figure 8