Product Manual

Not for

Reproduction

Assembly

3. Insert the rear support rod (CC, Figure 3) into the right

and left rear hitch support holes. Secure with cotter pins

(A). Cotter pins should be on the inside of the hitch

supports.

Figure 3

4. Place the sub-frame assembly (DD, Figure 4)

underneath the tractor.

5. Hook the arms of the sub-frame assembly onto the rear

support rod as shown in Figure 4 inset.

Figure 4

Sub-Frame Assembly Installation

1. Remove the nuts and bolts (a, Figure 1) on existing right

and left mower lift arms (b). Retain nuts and bolts for

Step 2.

Figure 1

2. Insert right (AA, Figure 2 ) and left (BB) rear hitch

supports between tractor and lift arm. Secure with nuts

and bolts from Step 1. Make sure the hooks (c) of the

hitch supports are inserted into the holes of the tractor

frame.

Figure 2