Manualshelf

Operator's Manual

ManualsBrandsSnapper ManualsLeaf BlowersXD PowerGrip Max 140 MPH, Max 700 CFM 82-Volt Lithium-Ion Cordless Leaf Blower Kit, Battery and Charger Included
11121314151617181920
Not for Reproduction
12
ASSEMBLING THE BLOWER TUBE (See Figure 2.)
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always
remove the battery pack from the tool when assembling parts.
1. Align groove on the blower tube with the tube release button.
2. Move the tube until the tube release button engages into the groove.
3. Connect the nozzle to the blower tube until the latch on the tube engages
into the opening on the nozzle.
Fig. 2
Blower
tube
Tube release
button
Nozzle
ASSEMBLY