Replacement Part List

Not for
Reproduction
16
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Motor fails to start
when switch trigger is
depressed.
Battery is not secure. Ensure that the battery is
fully secured in the blower.
Refer to Installing the Battery
section in this manual.
Battery is not charged. Charge the battery pack
according to the instructions
included with your model.
Unit will not start. Defective power switch. Have the power switch
replaced by an authorized
service center.
The unit will start,
but air will not ow
through the tube.
Blocked tube. Clear the blockage.
Cruise Control Lever
doesn't work.
The screw is loose. Tighten the screw with a
phillips head screwdriver.