Use and Care Manual

Not for

Reproduction

ASSEMBLY

Fig. 2

UNFOLDING AND ADJUSTING LOWER HANDLE (See Figure

WARNING

Folding or unfolding the handle improperly can damage the cables, causing

an unsafe operating condition.

• Do not damage the cables when folding or unfolding the handle.

• If a cable is damaged, contact an Authorized Service Dealer.

• Pull and rotate the handle knobs (1) 90° on both sides to loosen the lower

handles (2) on both sides.

• Move the lower handles to the operating position. You may raise or lower the

handle to a position comfortable for you. There are 3 positions (3) for you to

choose. Release the handle knobs to lock the lower handle into position.

Note: Ensure both sides are set at the same position for proper assembly.

(1)

(2)

(3)