Use And Care Manual
OPERATION
11
Figure 6
BATTERY
WARNING
Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufcient to
inict serious injury.
INSTALLING THE BATTERY PACK
See gure 6
• Insert battery pack into tool until an audible click is heard.
REMOVING THE BATTERY PACK
See gure 6
• Depress the battery release button in the back of the battery pack and pull battery pack out of tool.
Battery release button
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or
accessories not recommended can result in serious personal injury.
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or re: 1. Replace the battery or
the charger immediately if the battery case or charger cord is damaged. 2. Read, understand, and follow the instructions
contained in the charger manual.
STARTING AND STOPPING THE POLE SAW
See gure 7
To start:
• Press the on/off button.
• Depress the lock-out button and squeeze the switch trigger.
• Press high speed button to increase speed depending upon grass condition. Two LED's will illuminate above the high
speed button indicating that the pole saw is in the high speed setting.
To stop:
• Release the switch trigger.
• Press the on/off button again to turn the unit off.
Note: The unit will power itself down after being idle for 1 minute.
Not for Reproduction