Use and Care Manual

Fig. 7
ASSEMBLY
TO INSTALL BATTERY PACK (See Figure 7)
Lift and hold up the battery door (1).
Align the battery (2) with the mower’s battery port.
Make sure the battery release button (3) snaps in place and that battery is fully seated and secure in the mower before
beginning operation.
If the machine is not going to be used immediately, remove the battery.
Close the door.
14
TO REMOVE BATTERY PACK (See Figure 7)
Release the bail lever to stop the mower.
Open the battery door.
Press the battery release button (3) on the mower. This will cause the battery to raise out of the tool slightly.
Remove battery from the mower.
(3)
(1)
(2)
Not for Reproduction