MSDS

Section 6: Accidental release measures
6.1 Personal precautions, protective equipment, and emergency procedures: wear protective
gloves and glasses, remove spilled material and do not inhale the gas as much as possible . do
not touch as much as possible .
6.2 environmental precaution: Do not throw out into the environment especially water source and
sewer.
6.3 Methods and materials for containment and cleaning up: The spilled solid are put into the
container, the leaked place is wiped off with dry cloth .
Section 7: Handling and Storage
7.1 Precautions for safe handling
：
处置
Handling
Do not wet the battery with water, seawater, drink or acid;
or expose to strong oxidizer.
・
Do not damage or remove the external tube.
・
Keep the battery away from heat and fire.
・
Do not disassemble or reconstruct the battery; or solder
the battery directly.
・
Do not give a mechanical shock or deform.
・
Do not use unauthorized charger or other charging method.
Terminate charging when the charging process doesn
’
t end
within specified time.
7.2 Conditions for safe storage, including any incompatibilities
：
储存
Storage
Do not store the battery with water, seawater, strong acid or
strong oxidizer.Avoid direct sunlight, high temperature, and
high humidity.
Section 8: Exposure Control / Personal Protection
8.1 Control parameters:
Occupational exposure limits: no exposure limit
Biological limit values: no exposure limit
exposure weather limit : forbidden to exposure in water .
8.2 Appropriate engineering controls: Leak from a damaged or opened battery: Provide
adequate ventilation if fumes or vapours are generated
8.3 Individual protection measures, such as personal protective equipment
Hand protection
：
not necessary under normal condition
Eye protection : not necessary under normal condition
Body protection: not necessary under normal condition
Summarize
；
personal protective equipment should be used when the battery is
damaged .