Manual

KNOW YOUR PRESSURE WASHER
_ Read this Operator's Manual and safety rules before operating your pressure washer.
.............................Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
High Pressure Hose
Accessory Tray
Fuel Tank
Throttle Lever
Choke Lever
Fuel Valve
Recoil Starter
(on front of engine)
Filter
Spray Tips
Nozzle Extension with
Quick Connect
Spray Gun
Data Tag
Oil Fill Cap
Chemical Injection Water Inlet
Siphon/Filter High Pressure Outlet
Pump equipped with
Automatic Cool Down System
Accessory Tray m Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, ect.
Air Filter -- Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches J25 °. J55°F.Warm water will
discharge from pump onto ground.This system prevents
internal pump damage.
Chemical injection Siphon/Filter -- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke [.ever -- Prepares a coJd engine for starting.
DataTag -- Provides model, revision and serial number of
pressure washer. Please have these readily available if calling
for assistance.
Fuel Tank- Fill tank with regular unleaded fuel.Always leave
room for fuel expansion.
Fuel Valve m Used to turn fuel on and off to engine.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet--To connect high pressure hose.
Nozzle Extension with Quick Connect --Allows you to
switch between four different spray tips.
Oil Fill Cap -- Fill engine with oil here.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Safety Goggles (not shown) --Always use the enclosed
goggles or other eye protection when running your
pressure washer.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device, includes trigger lock.
Spray Tips -- Chemical injection, 0 °, J5 °, and 40°: for various
high pressure cleaning applications.
Throttle Lever--Sets engine in starting mode for recoil
starter and stops a running engine.
Water inlet -- Connect garden hose here.