Instructions

70
|
CNC Carving
How to Set the Work Origin
1. After receiving the G-code file, tap Yes and Next on the Touchscreen to enter the Set Work Origin screen.
2. Tap X-, X+, Y-, Y+, Z-, or Z+ to move the CNC Bit to where the Work Origin will be (In this case, we set the
center of the image as the coordinate origin in the software). Now the CNC Bit should be about 5 mm away
from the material.
5 mm
If you need to adjust settings, you can either tap Adjust Settings on the Preview screen or
swipe left on the carving progress screen.