Instructions

24
|
Snapmaker Enclosure
|
25
Enclosure Assembly
17
/32
Bury the left LED Strip Cable into the groove of the beam. Fix the cable
with Cable Clips.
Cable Clip × 3
Tilt the snap
joint of the Cable
Clip and press it
against the groove
of the beam to clip
it in. The sheet
of the Cable Clip
should hold the
cable inside the
adjacent groove.
18
/32
Transfer the machine to a proper place and enclose the machine with the
frame from above.
The provided exhaust duct measures 75mm in diameter and 2m in length. When exhausting
outdoors, be sure to choose a proper exhaust location.