Instructions

12
|
Snapmaker Enclosure
|
13
Enclosure Assembly
05
/32
Attach four 24 Beams.
24 BEAM A350-2
× 3
24 BEAM A350-3
× 1
STEP 04
M4 × 28 Hex Socket Short Head
Screw
× 8
1:1
Make sure to place the 24 BEAM A350-3
in accordance with the direction of the
text, with the Hall Switch’s outer covering
towards the inside.
Do not tighten the
screws until Step 9.
06
/32
Assemble the top rectangular frame – 1.
24 BEAM A350-1
× 1
48CA BEAM A350-3
× 1
M4 × 28 Hex Socket Short Head
Screw
× 2
1:1
180°
Notice the position of
the LED Strip Port.