Instructions / Assembly
Directions for constructing your SnapFence
TM
Starter Kit.
IF YOU CAN DREAM IT, YOU CAN BUILD IT.
Starter Kit
Instructions
1
1) Unpack box and separate parts.
2) Install desired ground attachments in your determined locations.
Typical attachments are shown, Ground Anchor Stakes** or Base Mounts (M1).
3) Install the Posts (V1) by sliding them onto the ground attachments and secure in place with screws. Secure with PVC glue if desired.
If installing a 3’ high fence as shown in the example, no cutting will be necessary
if using 39” Posts.
4) Build the Hinged Frame
Attach the Hinge Elbows (E1) to the 46” Rails (H1) for the horizontals as well as the 30” Balusters (B1) for the verticals of the frame.
Slide them into the Rails until they ‘Snap’ into place. You will want to give it a gentle tap to secure the tight fit. Build all your hinged
hinged frame sections before moving onto the next step. You should have (3) finished frames.
5) Slide the lower Hinge Brackets (K1) onto the 39” Posts (V1). Secure with screws.
Slide the finished hinge frames onto the Hinge Bracket (K1) Pins. Slide the upper Hinge Bracket (K1) onto the post and let the pin
gently slide into the Hinge Elbow (E1). Secure with Screws. Slide the Post Caps (C1) onto the 39” Posts (V1).
6) Finish with pre-cut Lattice SnapPanels.
Continue to add to your project with the SnapFence
TM
Extension Kit, (sold separately.)
(4) 39” Posts
(6) 46” Rails
(12)
Hinge
Elbows
(3)
Bag of
Screws
(4)
Post
Caps
(4)
Base
Mounts
Part Number: HSK-3x13L
Hinged Fence Starter Kit Lattice Panel
(3)
Lattice
Panels
(12)
Hinge
Brackets
(6) 30” Balusters
V1
H1
B1
E1 C1 M1 K1
**Ground Anchor Stakes (sold separately.)
Solid
Secure base with larger
screws/bolts as needed.
Attach post to
anchor stake
with screws.
Soil
Ground
Anchor
Stakes**
Base Mounts
V1 V1 V1
Slide Slide
Base Mounts can
be free-standing.
OR
V1
M1
holes face upward
holes face downward
Finished
Hinged
Frame
B1 B1
H1
H1
E1
E1
E1
E1
46”
30”
V1
V1
Base Mounts
Slide Hinge
Bracket
onto Post.
K1
Slide Hinge
Bracket
onto Post.
Hinged
Frame
C1
Slide Hinge Frame
onto
Hinge Bracket.
Slide Hinge Frame
onto
Hinge Bracket.
Slide Hinge onto Post and
into Frame.
K1
x 3
Visit: www.snapfence.com
for more How-To help.
Scan the QR code to take you
directly to useful
SnapFence tips.
H1
H1
B1
B1
M1
Screw
through
back side
of lattice
panel.