User's Manual
Table Of Contents
- 17 MARS-3102 User Manual_0904
- 17 MARS-3102 User Manual_0731
- Safety Information
- Contents
- Using This Manual
- Introduction
- Getting Started
- Navigation
- Scanner Operations
- OBD Direct Operations
- Component Test Operations
- Scope Multimeter Operations
- Ask-a-Tech Operations
- Information Operations
- Vehicle History Operations
- Data Manager Operations
- Help Operations
- System Settings Operations
- Maintenance
- Software License Agreement, North America
- Index
- 文件2
- 17 MARS-3102 User Manual_0731
- RF Exposure Information (SAR) CCS
118
Chapter 15 Maintenance
This section covers how to care for your Diagnostic Platform components.
15.1 Display Device
Perform the following services on your Display Device on a routine basis to keep it in top condition.
15.1.1 Cleaning the Touch Screen
The touch screen can be cleaned with a soft cloth and alcohol or a mild window cleaner.
IMPORTANT:
Do not use any abrasive cleansers or automotive chemicals on the touch screen.
15.1.2 Calibrating the Touch Screen
The touch screen can be calibrated for accuracy using the PenMount (PM) utility of the unit.
z To calibrate the touch screen:
1. From the Windows toolbar select Start > PenMount Control Panel.
Figure 15-1 Launching the calibration program
2. In the PM Control Panel; highlight PenMount 6000 RS232 and select Configure.
3. Select one of two calibration options: