Product Manual

2
How to Use
E-Fitting and Snaplocs: Figure 1; When installing the E-Fitting strap end into a
Snaploc simply pull back on the leaver and insert shown end into Snaploc. Figure 2;
Insert rest of fitting fully into the Snaploc. Figure 3; Release leaver and click securely in
place. Make sure the E-Fitting strap end is as shown in Figure 3 fully secured in its place
before use. Always make sure nothing is close to or touching the E-Fitting release lever
when in use as this may cause strap to release.
1 2 3
Cam E-Strap: Figure 1; When using the Cam Buckle strap, feed strap through cam
buckle as instructed on side of cam. Figure 2; Connect both ends of strap securely to
Snaplocs. Figure 3; Pull on end of strap until strap is securely tightened. Figure 4; To
loosen strap push down on lever end of cam buckle and loosen as needed. Always make
sure nothing is close to or touching the E-Fitting release lever when in use as this may
cause strap to release. Figure 5; If your strap has a hook & loop fastener use it for
fastening excess end of strap and for storage.
1 2 3
4 5
Loc-Ring: Figure 1; When securing the Loc-Ring to a Snaploc follow the same
instructions used for the E-Fitting and Snaplocs as listed herein. Figure 2; The Loc-Ring
attachment is useful for fastening ropes, hooks and other items.
1 2
Loc-Link: Figures 1-2; The Loc-Link strap coupling connects two or more E-Straps
together. Follow the same instructions used for the E-Fitting and Snaplocs as listed herein.
This attachment is useful for extending the length of any E-Strap to fit around larger cargo.
1 2
Ratchet E-Strap: Figure 1; Connect both ends of strap securely to Snaplocs. Figure
2; Feed end of strap through ratchet receiver as shown and pull through ratchet until
almost snug on your cargo. Figure 3; Begin moving ratchet handle up and down until
cargo is secure and there is a minimum of two revolutions of strap wrapped around the
center pivot. Be sure not to over-tighten strap as this may cause damage to connection
points or cargo. Figure 4; To release, pull back on the ratchets release lever and open
handle 180 degrees and pull on strap until loose. Figure 5; If your strap has a hook & loop
fastener use it for fastening excess end of strap and for storage. Depending on amount of
use and weathering, mechanisms may become restricted. A very small amount of
lubrication may be applied only on the mechanical metal parts at the location causing the
restriction.
1 2 3
4 5
Loc-Hook: When installing the removable Loc-Hook on your straps, there are two
options; Figures 1-2-3; For the Fixed Method slip the Loc-Hook into the E-Fitting loop at
end of strap. Figure 4; For the Adjustable Method slip the hook over the strap at any
location until fully in place. The Loc-Hook can also be put on the strap in a forward or
reverse position. Loc-Hooks can be used to secure cargo with or without using the E-
Fitting or Snaplocs. The bonded protective coating on the hook is subject to scratching and
rubbing off with use and is not covered under warranty. Damaging vinyl coating will not
affect the integrity of the hook.
1 2 3 4
Other great Snap-Loc products "The Snap-Loc Cargo Dolly System"...
Snap-Loc Dolly E-Strap Connection Add-On Push Add-On Panel Connector
Warranty
All Snaplocs (a.k.a. Loc-Downs), Straps and system Accessories are warranted to be free
from defects in material and workmanship for a period of 90 days (warranty period) from
date of purchase, or if you placed a special order with us from date of receipt of product.
Some items may have up to a 1 year warranty depending on store of purchase (check with
Snap-Loc or store of purchase). During the warranty period Snap-Loc will, at its option,
repair or replace without charge any part of our product found to be defective in material
or workmanship (shipping cost may be subject to charge). This warranty does not extend
to any product which has been subject to misuse, abuse, negligence, accident, alteration,
improper installation, over tightening, superseding recommended weight limits, scratches,
discoloring, or unauthorized repair. If product becomes structurally damaged immediately
discontinue use. In no way will Snap-Loc Cargo Control Systems, LLC (Snap-Loc) be
liable for special, direct, indirect or consequential damages, loss of vehicle, cargo, profits,
personal injury, death or the like for any reason. Please contact our customer service
department or the store of purchase for more details. The literature included with this
product has been written for your safety. If you do not accept the terms and conditions
herein do not use this product and return it within 7 days after purchase. By keeping this
product you are agreeing to these terms and conditions. If returning products, return them
to the store of purchase within the warranty period. No returns will be accepted after the
warranty period unless special provisions have been made with the store of purchase (see
store of purchase for further details). If you purchased your product directly from Snap-
Loc please contact the Snap-Loc Customer Service Department for a Return Merchandise
Authorization (RMA) number and return shipping instructions. Products returned to Snap-
Loc without an RMA number will not be accepted. After receipt of an RMA number, the
defective product must be returned to Snap-Loc within 30 days of the RMA approval of it
will result in loss of refund or replacement.
SNAP-LOC CARGO CONTROL SYSTEMS, LLC.
5670 La Costa Canyon Court, Las Vegas, NV., U.S.A.
800-798-4521 www.snaploc.com
(Created April 2012. Please check our website or store of purchase for any updates to this literature)