User Manual

Use the Project 33 circuit, but select Game 17 using the game selection
procedure in project 17.
Once the player selects Game 17 and sees “Go” on the display, then:
● Press button B and the game will begin.
● A random sequence of lights will quickly flash and then the player has
to repeat that sequence in the correct order by pressing button A for the
Red LED, button B for the Yellow LED, and button C for the Green LED.
● If the player gets 12 in a row right, the winning song will play, LEDs
will flash, the U29 LED display will say “oh YA”, and the game will
start over (“Go” will appear on the display).
● If the player enters the wrong sequence at any point, the losing song
will play and the U29 LED display will say “oh no”, and the game will
start over (“Go” will appear on the display).
Use the Project 33 circuit, but select Game 18 using the game selection procedure
in project 17.
Once the player selects Game 18 and sees “Go” on the display, then:
● Press button B and the game will begin.
● A random sequence of lights will flash and then the player has to repeat that
sequence in the correct order by pressing button A for the Red LED, button
B for the Yellow LED, and button C for the Green LED.
● The random sequence of lights will start out slowly flashing, but the speed at
which they flash will increase progressively the further into the game the
player gets.
● If the player gets 12 in a row right, the winning song will play, LEDs will flash,
the U29 LED display will say “oh YA”, and the game will start over (“Go” will
appear on the display).
● If the player enters the wrong sequence at any point, the losing song will play
and the U29 LED display will say “oh no”, and the game will start over (“Go”
will appear on the display).
Project 34
Memory Game (easy)
Use the Project 33 circuit, but select Game 15 using the game selection
procedure in project 17.
Once the player selects Game 15 and sees “Go” on the display, then:
● Press button B and the game will begin.
●
A random sequence of lights will slowly flash and then the player has to
repeat that sequence in the correct order by pressing button for the
Red LED, button B for the Yellow LED, and button C for the Green LED.
● If the player gets 8 in a row right, the winning song will play, LEDs will
flash, the U29 LED display will say “oh YA”, and the game will start
over (“Go” will appear on the display).
● If the player enters the wrong sequence at any point, the losing song
will play and the U29 LED display will say “oh no”, and the game will
start over (“Go” will appear on the display).
Use the Project 33 circuit, but select Game 16 using the game selection
procedure in project 17.
Once the player selects Game 16 and sees “Go” on the display, then:
● Press button B and the game will begin.
●
A random sequence of lights will quickly flash and then the player has
to repeat that sequence in the correct order by pressing button A for the
Red LED, button B for the Yellow LED, and button C for the Green LED.
● If the player gets 8 in a row right, the winning song will play, LEDs will
flash, the U29 LED display will say “oh YA”, and the game will start
over (“Go” will appear on the display).
● If the player enters the wrong sequence at any point, the losing song
will play and the U29 LED display will say “oh no”, and the game will
start over (“Go” will appear on the display).
-26-
Project 35
Memory Game (medium)
Project 36
Memory Game (hard)
Project 37
Memory Game (progressive)