- Standard Microsystems User Manual Environmental Monitoring Device EVB-EMC2101

EVB-EMC2101 User Manual

SMSC EMC2101 Revision 1.5 (12-13-06)

NOTE: Only one jumper is to be installed on JP11 and a minimum of one jumper must be installed

for the device to operate.

3.10 Other Sensor Features

Other features such as Ideality Factor Configuration, Conversion Rate, Digital Filtering, Look-up Table

Functionality, and Standby Mode can be controlled with EMC2101 registers. See the datasheet register

description for details.

Table 3.6 ALERT

Pull-up Resistors - SMBus/FAN MODE

JUMPER NAME OPEN SHORT

JP11 33k NA Auto load via EEPROM -

Initial FAN 0% Duty Cycle

18k NA Auto load via EEPROM -

Initial FAN 100% Duty Cycle

10k NA Host load via SMBus -

initial FAN 0% Duty Cycle

5.6k NA Host load via SMBus -

initial FAN 100% Duty Cycle