User's Manual

smart microwave sensors GmbH
CONFIDENTIAL AND PROPRIETARY
The Information contained in this document shall remain the sole exclusive property of s.m.s smart microwave sensors GmbH and shall not
be disclosed by the recipient to third parties without prior consent of s.m.s smart microwave sensors GmbH in writing.
2009-02-16 UMRR Documentation_v3 Page 5 of 18 February 16, 2009
Separation of two objects To be separately detectable, two objects of identical
reflectivity must be different in speed >= 0.25ms
-1
Tracking Performance:
Number of simultaneously tracked objects Up to 32
(can be adjusted by software)
Supply:
Power Supply 8…32V
Single Sensor Power consumption: < 3,5W
Interface:
CAN Bus Interface V2.0B(passive)
Data rate typically set to 500kbit/s
(other data rates possible)
Synchronous Serial IF Not accessible for customers.
Timing:
Cycle Time Typ. <=160ms
Depending on Operational Mode, Parameter Settings,
CAN communication requirements.
Environmental Conditions:
Temperature Range -40°C .. +95°C