User Manual

PROPRIETARY
The information contained in this document may be subject to change without notice.
The information contained in this document shall remain the sole exclusive property of s.m.s smart microwave sensors GmbH.
2012-06-07_UserManual_EKTSDG.doc I Page 12 of 15 I June 7, 2012 www.smartmicro.de
6.2 Terminal Mode: Preset Setting
For using presets please refer to section 4.2.
Presets Setup Page
==================
[q] P1 Direction of Motion : 0 [0=Forward, 1=Backward]
[w] P1 Speed : 3 [001..200km/h]
[e] P1 Reach : 100 [001..100%]
[r] P1 Time : 0 [001..600x100ms, 0=endless]
[t] P2 Direction of Motion : 0 [0=Forward, 1=Backward]
[z] P2 Speed : 113 [001..200km/h]
[u] P2 Reach : 100 [001..100%]
[i] P2 Time : 60 [001..600x100ms, 0=endless]
[o] P3 Direction of Motion : 0 [0=Forward, 1=Backward]
[p] P3 Speed : 9 [001..200km/h]
[a] P3 Reach : 100 [001..100%]
[s] P3 Time : 10 [001..600x100ms, 0=endless]
[c] Default Preset : 1 [0=none, 1..3=Preset]
[l] Save and Leave Preset Setup
->
Figure 5: EKTSDG Preset Terminal Dialog
Refer to section 5.2 for parameter explanations.