Instructions / Assembly
NOTE: Connect connector to connector by aligning at the arrows on the connectors.
Installation (continued)
7
3
Connecting LED tape light and adaptor
□ Insert the plug from the adaptor (A) into the outlet on the side of the in-line remote control.
□ Use the four conguration options below to connect up to four LED tape lights.
• Connect the connector from the in-line remote (B) to the LED tape light (C).
• Connect LED tape light (C) to the LED tape light (C) (up to 4 max)
• Connect the LED tape light (C) to a connector (D) or (E)
• Connect connector (D) to connector (E)
Connect LED tape to connector
Connect LED tape to LED tape
Connect the connector to the LED tape light
Connect connector to connector
w
c
+
c
w
w
c
+
c
w
w
c
+
c
w
NOTE:
You can link together a maximum of 4 x 12” strips using the same adapter for a total of 48”.