Instructions / Assembly

Installation (continued)
A
A
B
EE
AA
6
Ƒ Loosen the two cap nuts (EE), attach the xture body (A) to
ceiling by passing the cap nuts (EE) through the larger portion
of the key holes. Twist the xture body (A) so that the screws
on the mounting strip (AA) move to the narrower portion of the
key holes, tighten the two cap nuts (EE).
Ƒ Carefully position the shade (B) against to the xture body (A),
and turn clockwise to lock the lamp in place.
4
Attaching the xture body to the outlet
box
5
Installing the shade to the xture body
Ƒ Strip 3/4 in. of insulation from the wire ends.
Ƒ Connect the black wire from the xture to the black wire from the outlet box, then connect the white wire from the xture to the
white wire from the outlet box.
Ƒ The bare copper ground wire from the xture must loop one turn under the head of the green ground screw (CC) on the mounting
strip (AA) before it is connected to the ground conductor of the supply circuit.
Ƒ Cover the wires with wire connectors (DD). Tape the wire connectors (DD) and wires together, and carefully position all wires
inside the outlet box.
3
Making the electrical connections
CC
AA
DD
A
NOTE: Make sure the emboss point on the fixture body
(A) matches the groove on the shade (B) well, and then
turn the shade (B) to lock it.