Instructions / Assembly

Installation (continued)
9
There are two installation options to choose from:
□ 5A: Remove the protective tape from the adhesive back of the remote carefully. Then place the remote control into position and press
to ensure a proper adhesion to the surface.
□ 5B: Screw the one screw into desired location. Hook the remote control onto the screw as shown in the diagram.
□ Connect the adapter to a power outlet.
5
Installing the in-line remote
6
Connecting to a power supply
5A 5B
Adapter
6a
6b
In-Line remote
LED strip light
NOTE:
6a:
6b: The LED strip and In-Line Remote can be used outdoors
but are not submersible.
GFCI receptacle with enclosure should ONLY be used.
WARNING: If using the adapter
outdoors where it could be
exposed to rain, snow, or
solid objects less than 1 mm
plug the adapter into
a Class A GFCI receptacle that
has a weatherproof enclosure.
WARNING: Risk of electric
shock. Mount the adapter
at a height greater than
30 cm / 11.8 in. from the
ground surface.
AA
30 cm / 11.8 in.