Instructions / Assembly

Installation

Ƒ Unscrew the two support screws (short) (DD) from the

mounting bracket (AA). Remove the mounting bracket (AA)

from the canopy of the xture body (A) and keep the mounting

bracket (AA) and two support screws (short) (DD) for later use.

Ƒ Fasten the mounting bracket (AA) onto the outlet box using

two outlet box screws (long) (BB).

Preparing the mounting bracket

Installing the mounting bracket

Ƒ Strip 3/4 in. of insulation from the wire ends.

Ƒ Connect the black wire from the xture to the black

wire from the outlet box, then connect the white

wire from the xture to the white wire from the

outlet box.

Ƒ The bare copper ground wire from the xture must

loop one turn under the head of the green ground

screw (CC) on the mounting bracket (AA) before it

is connected to the ground conductor of the supply

circuit.

Ƒ Cover the wires with wire connectors (EE). Tape

the wire connectors (EE) and wires together, and

carefully position all wires inside the outlet box.

Making the electrical connections