User Guide
Advanced Learning
Factory Reset
Warranty and Comments
Cable Box
If you do not use a set-top box, skip this remainder of this section.
1. Press and hold the [A] Button until the Indicator Light turns solid green.
2. Press and release the Mute Button. The LED will blink once and turn solid geen.
3. Point the remote at your Cable Box. Press and release the Channel Up button repeatedly, but slowly
and carefully, until the channel changes. When the channel changes its critical you stop pressing the
Channel Up button immediately to proceed with programming. You may have to press and release a
few times or 200 times or more, until you are successful.
4. If the channel never changed, please visit our website to access the Advanced Learning Guide to
complete Cable Box programming at www.smpltec.com/oneclick.
5. Programming must be done for both your TV and cable box separately. Locate and underline the
Device Codes for your TV and for your cable box, listed at the end of this guide for quick reference.
There may be one or many codes listed for any particular TV or cable box. For cable boxes, first
search by cable provider name. If you do not locate your cable provider name on our list, search
instead by the cable box's manufacturer name, which is usually marked somewhere on the cable
box. If you do not use a cable box disregard Programming For Cable Box section.
NOTE: If your device or devices is/are not listed, skip ahead to the Manual Code Search section.
However, if your TV or cable box was manufactured prior to, or around the year 2000, please check our
Full Code List on our website, www.smpltec.com/oneclick before you try the manual code search.
The SiMPL One Click remote is capable of learning additional functions from your current remote(s),
for example, Sleep Timer, Subtitles, Dashes or Periods (i.e. channels 33-7 or 22.5).
For Advanced programming please visit www.smpltec.com/oneclick and download the Advanced
Learning Guide.
If for any reason you need to reset your SiMPL One Click remote (i.e. if you want to use the SiMPL remote
with another TV/Set-Top Box) you can do so by holding the [A] Button & the Power Button for 3 seconds.
The Indicator Light will turn orange and blink. This will clear any programmed codes on the device.
The 12 MONTH WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS
ONLY. In no event will SiMPL Technology, its representatives, affiliates, associates and the like be liable
for any damages, including without limitation direct or indirect, special, incidental, punitive or
consequential damages, losses or expenses arising in connection with any failure of performance of
this device.
PROP 65: The SiMPL OneClick remote was successfully tested for excessive chemical or metal
content (known to the State of California) and contains acceptable levels according to Prop 65.
UHOHDVH¶$·
ÀUVW79FRGHQXPEHU
UHOHDVH¶$·
DQGKROG$XQWLOWKH
UHOHDVH$
ÀQDOL]HLWV