User Guide

Battery
Cover
Before you start, ensure there is a clear line of sight to both your TV and cable box (Inclusive of
satellite receivers and digital converters). To help ensure a hassle-free setup, please read the steps
carefully. In most situations you should be up and running in 5 to 10 minutes.
1. Install batteries
Using the enclosed mini Phillips screwdriver,
loosen the screw at the top of the battery
cover plate until the cover detaches. The
screw will remain on the battery cover.
Main Functions
Before Programming
Set-up
One Click is a universal TV remote with 5 main user functions; Power, channel change, volume, mute and
5 favorite channel buttons.
Insert two new AAA batteries,
replace the cover and tighten the
screw without over-tightening.
2. Remove the Programming Buttons Cover
Using the enclosed mini Phillips screwdriver, loosen the screw at the
bottom of the underside of the remote until the cover slides down and off.
The screw will remain on the unit.
Programming Button Cover
Guide
UHOHDVH¶$·
ÀUVW79FRGHQXPEHU
UHOHDVH¶$·
DQGKROG$XQWLOWKH
UHOHDVH$
ÀQDOL]HLWV