Data Sheet

Configurable Parameters
UUID, Major, Minor, Device Name, Device ID, Password, Advertising Interval, RSSI@1m, Tx Power etc;
Transmission Power Levels
8 adjustable grades;
Transmission power range: -40dBm to +4dBm.
Long Range
The max. Range 90 meters in the open space;
The range depends on the environment where the SMP Labs BT1-iBeacon is placed.
Security
8 characters password (Lock/Unlock parameters).
Low power reminder
Led flashes every 10 seconds if the battery capcity is under 5%.
Connection Mode
Advertising mode, non-connectable;
Configuration mode, connectable.
Custom made mounting
Keychain / neck chain;
3M sticker;
Logo and color customizable;
Provided with your own configuration.
OTA and DFU
Supported upgrade via Over-The-Air;
NORDIC
®
official Device Firmware Upgrade(DFU);
Reserved J-Link port on the board for programming.
Additional optional sensors available
We can also provide users with the same type of products with 3-axis accelerometer according to customer's needs.
4. Electronic parameters
Item Value Remarks
Case Color White Other colors can be customized
Main material ABS
Battery Model CR2032 Coin battery, 1pc, 230mAh
Operation Voltage 1.8-3.6V DC
Waterproof level IP67
Average Current 19.4uA Tested at -4dBm transmission power and 1000ms Advertising Interval.
Transmission Range Up to 90m(+4dBm)
Depending on the environment where the SMP Labs BT1-iBeacon is placed these value
might differ.
Antenna 50ohm On board/Ceramic Antenna