Manual

18
“CONSOLE INSTRUCTIONS – PROGRAM (P2 ~ P7)”
“1” Press any button on the console or begin pedaling to turn on the console
d. Make sure that the power cord is properly plugged into the socket.
e. The console would automatically shut off after 4 minutes of inactivity
f. Press any button on the console or begin pedaling to turn on the console. After a few seconds, the console will
then light up with a short beep sound, indicating the console will be ready for use
“2””HOLD TO RESET” button, an easy way to reset and enter into POWER ON status
Continue pressing START/PAUSE for 3 seconds, all the data will reset to the initial value and
the console will return to POWER ON status
“3” MANUAL PROGRAM (P1)
“A.“ENTER MANUAL PROGRAM (P2 ~ P7)”
POWER ON status
ENTER button:
When the power is turned on, the
manual program (P1) will be selected,
press the ENTER button to confirm and
enter P2~P7
d. START/PAUSE button: If you are currently
in another program (P2~P16), Press
START/PAUSE button to pause the
current program.
e. Press UP or DOWN button to select
P2~P7
f. Press ENTER button to confirm and enter
P2~P7
or