User Manual

17
Described definitions of each option are presented as follows:
Sensitivity
The higher the sensitivity of the motion detect is, the easier
the motion detect alarm will be triggered.
You can deploy the motion detect region here. Default motion
detect region is the whole area (Red means deployed)
Motion detect trigger interval is to set the interval of next trigger of
motion detect after the trigger of this time (1S default).
10 seconds more will be alarmed after the motion detect is
triggered;10 second is default setting,you can change it.
10 seconds more will be recorded after the motion detect is
triggered;10 second is default setting,you can change it.
The corresponding channel for recording after the motion
detect is triggered;
PTZ is to set the PTZ activation of the corresponding channel
after the motion detect is triggered;(not supported)
Show Message is to prompt the alarm information in the main
menu of the DVR; Send Email is to send an alarm message to a
corresponding mailbox;You have to set it,please refer to Email
setting Buzzer is that the DVR beeps; FTP upload is to upload
pictures to the corresponding FTP server.
Alarm output interface (not supported);
Set the start of tour after the motion detect is triggered;
set the time period for opening motion detect;
Region
Period
Interval/Sec.
Delay/Sec.
Alarm Output
Record delay/Sec.
Record Channel
Tour
PTZ Activation
Other
Video Blind :You can set it ,for steps ,please refers to motion detect;
Video Loss: You can set it ,for steps ,please refers to motion detect;
Alarm input/Output :Sorry,it is not supported for this type.
13 Email settings
Steps for that are presented as follows:
1)Right Click,navigate to Network Settings >Email